Forging machinery
Universal machine tools with CNC UMT-01, UMT-02, UMT-03
The universal machine tools with CNC in their basic version are designed for twisting square and flat material. The machine tools serve as drive units for replaceable blocks.
Possible operations with replaceable blocks:
- Forge-rolling
- End forging
- Basket production
- Scroll bending
Scroll bending machine tools with CNC SMT-02, SMT-03
The SMT special machine tools with CNC are designed for scroll bending by using special dies.
Hydrualic press with CNC HP-01
The hydraulic press with CNC HP-01 is for bending blank parts with the use of replaceable dies.
Operations possible:
- Bending of blank parts in dies
- Preprogrammed bending of blank parts
- Straightening
- Bending of tubes
- Production of decorative U-shaped clips
- Production of rings
Machine tool for rolling pipes MRP
The machine toole MRP is designed for manufacturing spiral pipes from round (electric welded or seamless) steel tubes.
The main components of machine tools, blocks and rollers are made of German metal.
Main forging operations
Forge-rolling (embossing a design) of flat, square and round material, rectangular tubes.
The fore-rolling is performed on the rolling block RB-02 (RB-03), which should be installed on the universal machine tool UMT-01 (UMT-02, UMT-03).
Twisting of square material
It is performed on the universal machine tool UMT-01 (UMT-02, UMT-03).
Twisting of tubes
It is performed on the forging machine tool MRP.
End forging
It is performed on the forging block FB-01 (FB-02, FB-03), which should be installed on the universal machine tool UMT-01 (UMT-02, UMT-03).
Scroll bending
It is performed on the scroll bending machine tool SMT-02 (SMT-03) with the use of dies.
Bending of blank parts
It is performed on the hydraulic press HP-01 with the use of dies.
Production of baskets
Baskets can be manufactured in two ways:
1. By using the hydraulic block HPB, which is to be installed on the universal machine tool with CNC UMT-01 (UMT-02, UMT-03).
2. By using hydraulic cylinder of the hydraulic press HP-01, which is to be installed on the universal machine tool with CNC UMT-01 (UMT-02, UMT-03) with the help of the device HAF.
The two machine tools (UMT-01 and hydraulic press HP-01) are used together in this case.
Bending of arcs for wickets, gates, etc. It is carried out on the universal bending machine tool UBM.
 Watch the video about the «OST-Stankoprom» forging machinery
|
Main
Stankoprom
